Holeshot Z Specification page
| Category | Parameter | Value |
| Model | Model Name | Holeshot Z |
| Engine | Engine Type | Single-cylinder, 4-stroke, air-cooled |
| Displacement | 54.7cc | |
| Bore × Stroke | 46mm × 36mm | |
| Compression Ratio | 8.0:1 | |
| Max Power | 1.7 kW | |
| Max Torque | 3 N.m | |
| Fuel Type | 92# unleaded gasoline | |
| Fuel Tank Capacity | 3.5L (0.92 US Gallon) | |
| Engine Oil Capacity | 250ml (0.07 US Gallon) | |
| Lubrication Type | Pressure splash lubrication | |
| Cooling Type | Air Cooled | |
| Idle Speed | 1200±120rpm | |
| Starting System | Starting Mode | Pull start |
| Transmission | Transmission Type | Auto |
| Drive Mode | Chain drive | |
| Air Filter | Sponge type | |
| Performance | Top Speed | 27 mph (43 km/h) |
| Max Range | 25 miles (40 km) | |
| Max Load Capacity | 80 kg (176 lbs) | |
| Climbing Ability | 30° | |
| Brakes | Front Brake | Hydraulic Brake Single Piston Calliper(Disc brake) |
| Rear Brake | Hydraulic Brake Single Piston Calliper(Disc brake) | |
| Brake Operation | Hand brake | |
| Suspension | Front Suspension | Invert Fork ⌀33.5*515mm |
| Fork Diameter | 33.5mm | |
| Front Suspension Travel | 155mm | |
| Rear Suspension | Inner oil-press shock 220mm | |
| Rear Suspension Travel | 30mm | |
| Chassis | Frame Material | Integrated 195 # steelpipe fully enclosed |
| Footpeg | Steel | |
| Wheels & Tires | Front Wheel Size | 10 inch |
| Rear Wheel Size | 10 inch | |
| Front Tire Size | 1.4-10 | |
| Rear Tire Size | 1.4-10 | |
| Tire Type | Cross-country tire 2.50-10 & 2.50-10 |
|
| Rim Material | Integral aluminum rim | |
| Dimensions | Overall Length | 48.8 in (1240 mm) |
| Overall Width | 22.3 in (566 mm) | |
| Overall Height | 31.9 in (810 mm) | |
| Seat Height | 24.4 in (620 mm) | |
| Wheelbase | 34.3 in (870 mm) | |
| Ground Clearance | 7.1 in (180 mm) | |
| Handlebar Height | 28.7 in (730 mm) | |
| Weight | Net Weight | 57.5 lbs (26.1 kg) |
| Wet Weight | 61.5 lbs (27.9 kg) | |
| Gross Weight | 66.1 lbs (30 kg) | |
| Rider Fit | Recommended Age | 12+ |
| Recommended Rider Height | 120-175 cm (3'11" – 5'9") | |
| Features | Kill Switch | Yes |
| Chain Cover | Yes | |
| Safety | Certification | EPA approved |
| Intended Use | Off-road | |
| Street Legal | Not street legal | |
| Warranty | Engine Warranty | 3 months |
| Parts Warranty | 1 month | |
| Wear & Tear Parts | Not covered | |
| Packaging Requirement | Original packaging must be kept | |
| Package | Assembly Required | 85% pre-assembled |
| Packing Size (L×W×H) | 42.52" × 20.67" × 22.44" (1080 × 525 × 570mm) | |
| Tools Required | Basic mechanic tools |